Product information
The SKY HERO II is a good-looking high-wing model which is a great choice for pilots with prior experience in flying rudder / elevator designs, and for practising simple aerobatics. The selected combination of wing area and airfoil endow the SKY HERO II with excellent, good-natured flying characteristics. The model features conventional built-up construction: the fuselage, wingand tail panels are factory-built and film-covered, with decals already applied. The ailerons, elevator and rudder are already attached using hinges. The elevator and rudder are actuated using the Direct-Steel system (DSS), which ensures slop-free linkages. Very little work is required of the builder to complete the model; you simply have to join the wing panels, attach the tail panels to the fuselage, install themotor, fueltank and undercarriage, and fit the RC system components and linkages. A four-channel RC system is sufficient to fly the model.

Pack contents
Assembly instructions in German, English and French, with photos. Fuselage, two wing panels and tail panels factory-built and film-covered, motor mount, undercarriage, wheels, small items and linkage hardware pack. The pack 9384.RC includes a factory-installed On / Off switch, fueltank and motor, with the pushrods set tothe correct lengths. All you need to do is join the two wing panels and glue the tailplane to the fuselage, connect the aileron and elevator pushrods to the horns, fit the wheels, charge the battery, install the receiver, connect the receiving system - and you're ready to fly.

RC functions
Rudder
Elevator
Ailerons
Throttle

Specification
Wingspan approx. 1490 mm
Length excl. spinner approx. 1250 mm
Wing area approx. 45.45 dm²
Tailplane area approx. 9.69 dm²
Total surface area approx. 55.14 dm²
Total surface area loading approx. 48.09 g/dm²
All-up weight approx. 2650 g

Availability: Product available in 6 to 8 days.