|
Transmitter Receiver Driven system Speed Controller Gyro Battery Servo
WK-0703 RX702 WK-WS-26-001 30A Speed Controller GX02 Li-PO 11.1V 1500mAh 7.6g(digital)
Specification (1). Main Rotor Diameter: 622 mm
(2). Tail Rotor Diameter: 135 mm
(3). Overall Length: 590 mm
(4). Receiver: RX-702
(5). Drive System: WK-WS-26-001
(6). Battery: 11.1V 1500mAh Li-PO battery
(7). All-up Weight: 600～635g (Battery included)
(8). Transmitter: WK-0703
(9). Gyro: GX02
(10).Speed Controller: WK-WST-30A
(11).Servo: weight 6.4g / speed 0.085sec/60o/ torque 0.8kg/cm / dimension 21.5 X11.8 X21.7mm Features 1). NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights.
2). Deluxe68#B design of metal tail, metal swash plate and metal rotor head is of legerity, innovation, precise and stability. The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage .
3). Highly efficient bevel wheel design is used in mesh between main gear and motor gear.
4). Deluxe68# series tail blades driven by belt provide easy adjustment, stable flight, and low noise.
5). Outer-rotor motor as the main power is powerful and makes the flight much stable.
6). 7-ch transmitter WK-0703 with adjustable PIT parameter, throttle curve, and servo exponential function. Component details : Transmitter WK-703 1)．8 model's data storage
2)．PLL(Phase-Locked Loop),free frequency switch without crystal oscillator change,and sound
3)．phase-locked function
4)．Easy operation menu
5)．Compact design and convenient holding
6)．PPM/PCM switchable
7). Power source : 1.5X8AA dry batteries or 1.2VX8 Nicad (9.6V 600mAh) GYRO GX02 1). Control system: The gyro GX02 utilizes the AVCS (Angular Vector Control System) designed for the model helicopter.
2). Gyro sensor: ultra mini piezoelectric sensor
3). Operating voltage: 4 ~ 6V DC
4). Operating temperature range: -5 ~ +75 ℃
5). Dimension: 32 * 30 * 21mm
6). weight: 23g
7). Intuitionistic and convenient LED editing screen
8). Available to set sensitivity, change the gyro direction, limit the servo travel, and set the AVCS.
9). Capable of adjusting gyro sensitivity and switching AVCS mode and normal mode via transmitter
10). Matched with digital hi-speed servoWk-0902H BRUSHLESS Specification:
Dimension:Φ 26 X 32.5mm
Speed constant(KV): 3500RPM/V
No-Load Current: <3.2A
Working voltage: 6-18V
Shaft extension: 17.0mm
Shaft diameter: Φ3.0mm
Weight: 60g
Availability: Good news, this product in stock, ready for shipping. |
