Boutique de modélisme

1316.18.10 Propeller 18x10cm

[151313161810]

 

1316.18.10 Propeller 18x10cm

 

3.41EUR

Product informations

SUPER NYLON propellers
Made of glass fibre reinforced nylon.
Highly efficient and tough. In neutral colour. For the selection of propellers approximate
values are indicated for each engine.

Please note

When used in conjunction with large and very powerful engines the ultimate load factor of SUPER NYLON propellers may be reached or even exceeded. In cases like these wooden pro-pellers should preferably be used. The rotational speed, that is the velocity of the airscrew tip in the plane of rotation, provides some information on the limiting factor. The rotational speed must not exceed 180 m/sec. Maximum airscrew rpmare then governed by the diameter of the propeller. Max. revolutions can be calculated using the following formula: Constant (includes safe value) 3438: diameter of prop (in meters). Taking a 28 cm diam. propeller the formula reads: 3438.0.28 = 12279 rpm. The actual ultimate load depends on several other factors in addition to rotational speed though, such as engine vibrations and propeller warping as a result of improper installation, to name but a few, which can affect theultimate load factor negatively. Propellers should be mounted perfectly centered on the prop shaft and with a minimum of play. If necessary install a propeller adapter of No. 198. In order to preserve the good physical properties of SUPER NYLON propellers, in particular their strength, their water contents of approx. 2 - 3% must stay trapped in the material. For that reason they should not be stored in dry rooms or near warm heating units. A lack of water contents can be compensated either by putting the propeller in boiling water for a short while or by submerging it in water at ambient temperature for a couple of days. Be sure to abide by the safety guidelines concerning
rotating propellers! Always remain clear of the propeller arc! Do not ever use a damaged propeller!

Specifications

Ø 18 cm

 

 

Good news, this product is in stock with qty 2

 

 

This product was added to our catalog on Thursday 20 January, 2011.

 

  http://www.e-modelisme.com/13161810-propeller-18x10cm-p-17773.html   

 

Reviews

 

Customers who bought this product also purchased
6053.23 Propeller adaptor 2.3mm
6053.23 Propeller adaptor 2.3mm
1316.18.12 Propeller 18x12cm
1316.18.12 Propeller 18x12cm
1785 Bow thruster with electric motor
1785 Bow thruster with electric motor
3301 SPEED 600 8,4V
3301 SPEED 600 8,4V
3071 High-Flex copper Wire
3071 High-Flex copper Wire
2596.5 NiMH-Ecopower 6,0V/3000 mAh G2
2596.5 NiMH-Ecopower 6,0V/3000 mAh G2

 

 

Currently viewing: 1316.18.10 Propeller 18x10cm - Graupner - Propellerheads & Blades