Description
With 5 control functions, the mx-10 HoTT enables advanced RC model builders to control numerous models. The use of Graupner HoTT 2.4-GHz transmission technology ensures high functional reliability through bidirectional communication between sender and receiver, with telemetry displayed via the optional Smart-Box and ultra-fast response times.
Programming with switches
Dual rate switch 70% / 100%
Wirelessteacher/pupil mode
Wireless simulator operation via the SUM signal of the receiver
Mixer for rudder or delta-wing or V-tailplane in the sender
Additional mixers possible via the receiver
Servo reverse function
Mode 1-4 programmable
3-pole serial connection for USB adapter #7168.6 for firmware upgrades and for display of telemetry data with the Smart-Box #33700
- Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
- Bidirectional communication between transmitter and receiver
- Wireless L/S function
- Servo cycle times of 10ms can be selected for digital servos (with Smart-Box)
- Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor
- Short aerial, foldable
- 5 control functions
- Modes 1 to 4 are freely selectable
- Programmable failsafe function »Stop« or »Advance to preset positions«
- Charger jack for chargeable transmitter battery
- Integrated V-mixer, delta-mixer, or rudder mixer selectable, makes it possible, for example through skilful combination of control functions to accomplish finely dosed and realistic turning manoeuvres, such as for track vehicles, duo-boat drives, and V-tailplanes on aircraft models
- Servo-reverse switch for simple adaptation of turning direction for all control channels
The set includes :
Microcomputer telemetrytransmitter Graupner HoTT mx-10 with built-in rechargeable 1500 mAh NiMH transmitter battery, Graupner HoTT GR-12 receiver, 200 mA transmitter charger General HoTT features :
- Simple, extremely fast binding
- Range test and warning function
- Low-voltage warning
- Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to2.5V)
- Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with the HoTT-Smartbox
- Binding of any number of receivers for channel expansion (max. of 32 channels)
- Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
- Maximum immunity to interference through optimised frequency hopping and broad channel spread
- Intelligent data transmission with correction function
- Extremely fast rebinding, even at max. distance
- Telemetry analysis in real time
- Over 200 systems can be used simultaneously
- Future-proof through update capability via USB interface
NEW :
- Extremely long range
- SUM signal programmable at the output of the highest channel for L/S, simulators, V-stabilisers, et cetera
- Simultaneous output of server outputs possible in blocks of 4
- Adjustable sensitivity and speed of the vario-sensors
- Faster response times (10ms periods adjustable)
- No additional delays due to module processors. The entire hopping management is done directly from the main processor
- USB connection possible
- Wireless teacher / pupil function
Specifications
Temperature range : -15 ... 55 °C
Aerial length: 120 mm
All-up weight, approx.: 630 g
Frequency : 2400 ... 2484,5 MHz
Range approx. : 4000 m
Dimensions (LxWxH): 190 x 175 x 115 mm
Charging rate : 125 mA
Operating voltage : 3,4 ... 6.0 V
 
|
