Description

With 12 control functions, the mx-20 HoTT lets the advanced RC model builder to control nearly any model. The use of Graupner HoTT 2.4-GHz transmission technology ensures great functional reliability through bidirectional communication between transmitter and receiver, with integrated telemetry, voice output via headphone output, and ultrafast response times.
The transmitter has 24 model memories. Simplified programming using touch keys. A contrast-rich, 8-line, blue-lit graphic display ensures perfect display of all setting parameters and telemetry data. Telemetry data and additional model memories can be stored on a micro-SD memory card. (later after update)
The channel signal is resolved at 12 bits in 4096 steps, thus providing extremely sensitive control.
USB connection for reading out and storing model memories and for firmware upgrades.

• Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
• Bidirectional communication between transmitter and receiver
• 5 different languages (German, English, later French, Italian, and Spanish) possible via software update. For availability of the respective language, see Download area.
• Servo cycle times of 10ms can be selected for digital servos
• Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor
• Short aerial, foldable
• Operation and programming based on the proven concepts of mc-19 to mc-24
• A contrast-rich, blue-lit graphic display ensures perfect control of settings and parameters such as model type, model memory, clocks, and operating voltage
• 12 control functions
• Free assignment of all switches
• 24 model memories
• 7 switches/keys, including 2 3-stage-switches, 3 2-stage switches, 2 keys, 3 analogue switches already installed
• Modes 1 to 4 are freely selectable
• CAP-TOUCH key with key lock function to prevent unintentional operation
• CAP-TOUCH display change from main menu to telemetry main menu using the ESC key
• Numerous telemetry display, programming, and analysis functions directly in the transmitter display
• Voice output can be called up via freely programmable switches
• 7 flight phases can be programmed
• Extensive programmes for fixed-wing and helicopter models
• Swashplate limiter
• Voith-Schneider limiter, similar to a swashplate limiter (later after update)
• Door Sequencer e.g. to automatically extend landing gear or operate flap drives with process control (later after update)
• Servo travel adjustment/B>: can be set separately for all servo channels and for each final value
• Sub-trim to set the neutral position of all servos
• 2-stage expo/dual-rate system, individually adjustable, can be switched during flight
• Mixer functions Programmable failsafe function »Hold« or »Advance to pre-set positions« adjustable separately for each individual servo channel
• Stop watches / countdown timers with alarm function
• Model copy function for model memories